Identification_Information: Citation: Citation_Information: Originator: K. Van Wilson, Jr, Michael G. Clair II, D. Phil Turnipseed, and Richard A. Rebich Publication_Date: 2008 Title: MSWBD_Polyline & WBD_MS_polygon Geospatial_Data_Presentation_Form: vector digital data Online_Linkage: http://www.ncgc.nrcs.usda.gov/products/datasets/watershed Description: Abstract: The U.S. Geological Survey, in cooperation with the Mississippi Department of Environmental Quality, U.S. Department of Agriculture-Natural Resources Conservation Service, Mississippi Department of Transportation, U.S. Department of Agriculture-Forest Service, and the Mississippi Automated Resource Information System developed a 1:24,000-scale Watershed Boundary Dataset for Mississippi including watershed and subwatershed boundaries, codes, names, and areas. The Watershed Boundary Dataset for Mississippi provides a standard geographical framework for water-resources and selected land-resources planning. The original 8-digit subbasins (Hydrologic Unit Codes) were further subdivided into 10-digit watersheds and 12-digit subwatersheds - the exceptions are the Delta part of Mississippi and the Mississippi River inside levees, which were only subdivided into 10-digit watersheds. Also, large water bodies in the Mississippi Sound along the coast were not delineated as small as a typical 12-digit subwatershed. All of the data-- including watershed and subwatershed boundaries, subdivision codes and names, and drainage-area data--are stored in a Geographic Information System database. Purpose: A watershed approach to investigations and management of water resources requires mapping of appropriate level hydrologic unit boundaries. The purpose of the hydrologic unit coverage is to provide and accurate, standardized GIS coverage of watershed boundaries through the fifth and sixth (10 and 12 digit) hydrologic unit scale using nationally accepted, consistent methods. Supplemental_Information: Linework reshapes based on 1:24,000 DRGs required to bring to NSSDA standard were completed in July 2008. During this work, some revisions beyond just reshaping were required. USGS will publish these data in 2008 in the following two approved publications that are currently in preparation: Wilson, K.V., Jr., Clair, M.G., II, Turnipseed, D.P., and Rebich, R.A., Development of a watershed boundary dataset for Mississippi: U.S. Geological Survey Open File Report 2008-1198, xx p. Wilson, K.V., Jr., Clair, M.G., II, Turnipseed, D.P., and Rebich, R.A., Watershed boundary dataset for Mississippi: U.S. Geological Survey Scientific Investigations Map 3020: Scale 1:500,000. Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 2008 Currentness_Reference: publication date Status: Progress: Submittal for certification. Maintenance_and_Update_Frequency: As needed and as funding is available. Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -91.677312 East_Bounding_Coordinate: -87.497350 North_Bounding_Coordinate: 35.167381 South_Bounding_Coordinate: 30.149453 Keywords: Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: Hydrologic Units Theme_Keyword: Hydrologic Unit Code Theme_Keyword: Region Theme_Keyword: Sub-region Theme_Keyword: Basin Theme_Keyword: Sub-basin Theme_Keyword: Watershed Theme_Keyword: Watershed Boundaries Theme_Keyword: boundaries Theme_Keyword: Subwatershed Theme_Keyword: WBD Theme_Keyword: Watershed Boundary Dataset Place: Place_Keyword_Thesaurus: None Place_Keyword: Mississippi Place_Keyword: Alabama Place_Keyword: Tennessee Place_Keyword: Arkansas Place_Keyword: Louisiana Access_Constraints: None Use_Constraints: The distributor shall not be held liable for improper or incorrect use of this data, based on the description of appropriate/inappropriate uses described in this metadata document. It is strongly recommended that this data is directly acquired from the distributor and not indirectly through other sources which may have changed the data in some way. These data should not be used at scales greater than 1:24,000 for the purpose of identifying hydrographic watershed boundary feature locations in Mississippi. USGS should be acknowledged as the data source in products derived from these data. The Mississippi Watershed Boundary Dataset is public information and may be interpreted by all organizations, agencies, units of government, or others based on needs; however, they are responsible for the appropriate application of the data. Federal, State, or local regulatory bodies are not to reassign to the Natural Resources Conservation Service any authority for the decisions they make. The Natural Resources Conservation Service will not perform any evaluations of these maps or purposes related solely to State or local regulatory programs. Photographic or digital enlargement of these maps to scales greater than that at which they were originally delineated can result in misrepresentation of the data. If enlarged, the maps will not include the fine detail that would be appropriate for mapping at the small scale. Digital data files are periodically updated. Files are dated, and users are responsible for obtaining the latest version of the data from the source distributor. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Mississippi Water Science Center Contact_Person: K. Van Wilson Contact_Position: Hydrologist, P.E. Contact_Address: Address_Type: mailing and physical address Address: 308 South Airport Road City: Jackson State_or_Province: MS Postal_Code: 39208 Country: USA Contact_Voice_Telephone: 601-933-2922 Contact_Facsimile_Telephone: 601-933-2901 Contact_Electronic_Mail_Address: kvwilson@usgs.gov Hours_of_Service: 8:00a - 4:30p Central, M-F Native_Data_Set_Environment: Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 3; ESRI ArcCatalog 9.2.5.1450 Data_Quality_Information: Logical_Consistency_Report: There are no unclosed polygons, intersections without nodes, or polygons without labels or with more than one label. Lineage: Source_Information: Source_Citation: Citation_Information: Originator: USGS Publication_Date: Unknown Title: USGS topographic quadrangle maps Source_Scale_Denominator: 24000 Type_of_Source_Media: paper Source_Information: Source_Citation: Citation_Information: Originator: USGS Publication_Date: Unknown Title: USGS Digital Orthophoto Quadrangle Type_of_Source_Media: online Process_Step: Process_Description: METHOD OF DIGITIZING PAPER QUADRANGLE MAPS Boundaries for the watersheds and subwatersheds were based on an existing set of 1:24,000-scale maps that contained drainage areas previously delineated by USGS personnel as part of ongoing water-resources investigations in the state. The watershed and subwatershed boundaries were then hand-digitized and processed using Arc/Info 8.3 workstation and stored as Arc/Info coverages. In some cases, 15-minute topographic quadrangles had been used in the 1970s and 1980s by the USGS to delineate watershed boundaries. During the current project, it was necessary to transfer watershed and subwatershed boundaries from the 15-minute topographic quadrangles to previously unavailable 7.5-minute topographic quadrangles prior to digitizing and GIS processing. Process_Date: Unknown Process_Step: Process_Description: METHOD OF MISSISSIPPI ALLUVIAL PLAIN DELINEATION 11-digit unit boundaries from the NRCS and an ancillary set of boundaries provided by the U.S. Army of Corps of Engineers (USCOE) were used as guidance to delineate watershed boundaries for the Delta. The boundaries provided by the USCOE were based on USGS digital line graphs (DLG). The NRCS and USCOE boundaries were transferred to 1:100,000-scale topographic quadrangle maps, and watershed boundaries were hand-drawn and digitized from those maps. The new set of watershed boundaries developed from the 1:100,000-scale maps were then transferred to 1:24,000-scale (or 7.5-minute) topographic quadrangle maps, and were refined and re-digitized according to topographic and hydrological features at the 1:24,000-scale. Process_Date: Unknown Process_Step: Process_Description: METHOD OF COVERAGE CREATION All coverages were appended together to create a single Arc/Info coverage. The appended coverage was then imported into the ESRI Geodatabase for editing. Checks were made to make sure that each polygon conformed to size limits established by NRCS standards. Polygons were assigned a 12-digit number as determined by Mississippi Water Science Center hydrologists. Attributes were added to the polygon layer to aid in selecting, identifying, and hydrologic units based on various permutations of the hydrologic unit code. Process_Date: Unknown Process_Step: Process_Description: Dataset copied. Source_Used_Citation_Abbreviation: Process_Step: META_ID: MS02 Process_Description: USGS; Mississippi State Steward, Van Wilson: Edits to polygons and linework. Source_Used_Citation_Abbreviation: Process_Date: 200905 Process_Step: META_ID: MS03 MS04 Process_Description: USGS; Mississippi State Steward, Van Wilson: Edits to polygons and linework; MS03 was used where a number, name, or line was changed; MS04 was used where only the acres were revised. Source_Used_Citation_Abbreviation: Process_Date: 200910 Process_Step: META_ID: MS05 MS06 Process_Description: Updates by USGS Water Science Center, Salt Lake City, Utah. Edits to any of the following: Polygon attributes, Line Mods, HU_Level, Linesource, DS codes and states. Source_Used_Citation_Abbreviation: Process_Date: 201011 Process_Step: META_ID: MS07 Process_Description: The Line Mods, HU_Level, Linesource, DS codes and states were checked, the following meta ids were used for any updates. Source_Used_Citation_Abbreviation: Process_Date: 201109 Process_Step: META_ID: MS08 - linesource updates and MOD updates Process_Description: edits by USGS Water Science Center in Salt Lake City, Utah. Source_Used_Citation_Abbreviation: Process_Date: 201205 __________________________________________________________________________________________________ Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Vector Point_and_Vector_Object_Information: SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: String Point_and_Vector_Object_Count: 4531 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Geographic: Latitude_Resolution: 0.000000 Longitude_Resolution: 0.000000 Geographic_Coordinate_Units: Decimal degrees Geodetic_Model: Horizontal_Datum_Name: North American Datum of 1983 Ellipsoid_Name: Geodetic Reference System 80 Semi-major_Axis: 6378137.000000 Denominator_of_Flattening_Ratio: 298.257222 Vertical_Coordinate_System_Definition: Altitude_System_Definition: Altitude_Resolution: 0.000100 Altitude_Encoding_Method: Explicit elevation coordinate included with horizontal coordinates Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: MSWBD_Polyline Entity_Type_Definition: polygons identify watershed boundaries Entity_Type_Definition_Source: n/a Attribute: Attribute_Label: OBJECTID Attribute_Definition: Internal feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: Shape Attribute_Definition: Feature geometry. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Coordinates defining the features. Attribute: Attribute_Label: Shape_Length Attribute_Definition: Length of feature in internal units. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Positive real numbers that are automatically generated. Attribute: Attribute_Label: HU_LEVEL Attribute: Attribute_Label: LINESOURCE Attribute: Attribute_Label: META_ID __________________________________________________________________________________________________ Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Vector Point_and_Vector_Object_Information: SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: G-polygon Point_and_Vector_Object_Count: 1486 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Geographic: Latitude_Resolution: 0.000000 Longitude_Resolution: 0.000000 Geographic_Coordinate_Units: Decimal degrees Geodetic_Model: Horizontal_Datum_Name: North American Datum of 1983 Ellipsoid_Name: Geodetic Reference System 80 Semi-major_Axis: 6378137.000000 Denominator_of_Flattening_Ratio: 298.257222 Vertical_Coordinate_System_Definition: Altitude_System_Definition: Altitude_Resolution: 0.000100 Altitude_Encoding_Method: Explicit elevation coordinate included with horizontal coordinates Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: WBD_MS_polygon Entity_Type_Definition: polygons identify watershed boundaries Entity_Type_Definition_Source: n/a Attribute: Attribute_Label: OBJECTID Attribute_Definition: Internal feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: Shape Attribute_Definition: Feature geometry. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Coordinates defining the features. Attribute: Attribute_Label: HUC_8 Attribute_Definition: A unique 8-digit code from the USGS map series "Hydrologic Unit Maps". The same number was used in every record that pertains to a subwatershed that resides within the same 8-digit sub-basin. Attribute_Definition_Source: Federal Standards for Delineation of Hydrologic Unit Boundaries Attribute_Domain_Values: Codeset_Domain: Codeset_Name: Federal Standards for the Delineation of Hydrologic Unit Boundaries Codeset_Source: Please refer to the Entity and Attribute Overview for valid values Attribute: Attribute_Label: HUC_10 Attribute_Definition: This field provides a unique 10-digit code for each watershed derived from the 8-digit code. This same number was used in every record that pertains to a subwatershed that resides within the same 10-digit Attribute_Definition_Source: Federal Standards for Delineation of Hydrologic Unit Boundaries Attribute_Domain_Values: Codeset_Domain: Codeset_Name: Federal Standards for the Delineation of Hydrologic Unit Boundaries Codeset_Source: Please refer to the Entity and Attribute Overview for valid values Attribute: Attribute_Label: HUC_12 Attribute_Definition: This field provides a unique 12-digit code for each subwatershed derived from the 10-digit code. Attribute_Definition_Source: Federal Standards for Delineation of Hydrologic Unit Boundaries Attribute_Domain_Values: Codeset_Domain: Codeset_Name: Federal Standards for the Delineation of Hydrologic Unit Boundaries Codeset_Source: Please refer to the Entity and Attribute Overview for valid values Attribute: Attribute_Label: ACRES Attribute_Definition: Area of subwatershed including non-contributing areas calculated to acres as a whole number, no decimals. Attribute_Definition_Source: Federal Standards for Delineation of Hydrologic Unit Boundaries Attribute_Domain_Values: Codeset_Domain: Codeset_Name: Federal Standards for the Delineation of Hydrologic Unit Boundaries Codeset_Source: Please refer to the Entity and Attribute Overview for valid values Attribute: Attribute_Label: STATES Attribute_Definition: The "States" field includes the names of all state(s) that the subwatershed falls within. Attribute_Definition_Source: Federal Standards for Delineation of Hydrologic Unit Boundaries Attribute_Domain_Values: Codeset_Domain: Codeset_Name: Federal Standards for the Delineation of Hydrologic Unit Boundaries Codeset_Source: Please refer to the Entity and Attribute Overview for valid values Attribute: Attribute_Label: NCONTRB_A Attribute_Definition: Drainage areas that do not flow toward the outlet of any hydrologic unit are considered non-contributing. Attribute_Definition_Source: Federal Standards for Delineation of Hydrologic Unit Boundaries Attribute_Domain_Values: Codeset_Domain: Codeset_Name: Federal Standards for the Delineation of Hydrologic Unit Boundaries Codeset_Source: Please refer to the Entity and Attribute Overview for valid values Attribute: Attribute_Label: HU_10_DS Attribute_Definition: The 10-digit code of the 5th level hydrologic unit that is receiving the majority of the flow from the watershed that the 6th level HU falls within. Outlets created by ditching or other artificial drainage were not considered for this field. Attribute_Definition_Source: Federal Standards for Delineation of Hydrologic Unit Boundaries Attribute_Domain_Values: Codeset_Domain: Codeset_Name: Federal Standards for the Delineation of Hydrologic Unit Boundaries Codeset_Source: Please refer to the Entity and Attribute Overview for valid values Attribute: Attribute_Label: HU_10_NAME Attribute_Definition: A unique name for each 5th level hydrologic unit that relates to the major water feature within the polygon or the major water body it contributes to Attribute_Definition_Source: Federal Standards for Delineation of Hydrologic Unit Boundaries Attribute_Domain_Values: Codeset_Domain: Codeset_Name: Federal Standards for the Delineation of Hydrologic Unit Boundaries Codeset_Source: Please refer to the Entity and Attribute Overview for valid values Attribute: Attribute_Label: HU_10_MOD Attribute_Definition: This field identifies interbasin transfers (IT), dams at outlet (DM), etc. that modify natural overland flow as modifications are identified from most significant to least significant modification(s). Hydrologic units with no modification are marked with NM. Attribute_Definition_Source: Modification by 1 to the Federal Standards for Delineation of Hydrologic Unit Boundaries Attribute_Domain_Values: Codeset_Domain: Codeset_Name: Federal Standards for the Delineation of Hydrologic Unit Boundaries Codeset_Source: Please refer to the Entity and Attribute Overview for valid values Attribute: Attribute_Label: HU_10_TYPE Attribute_Definition: This field identifies the type of watershed. Attribute_Definition_Source: Federal Standards for Delineation of Hydrologic Unit Boundaries Attribute_Domain_Values: Codeset_Domain: Codeset_Name: Federal Standards for the Delineation of Hydrologic Unit Boundaries Codeset_Source: Please refer to the Entity and Attribute Overview for valid values Attribute: Attribute_Label: HU_12_DS Attribute_Definition: The 12-digit code of the 5th level hydrologic unit that is receiving the majority of the flow from the watershed that the 6th level HU falls within. Outlets created by ditching or other artificial drainage were not considered for this field. Attribute_Definition_Source: Federal Standards for Delineation of Hydrologic Unit Boundaries Attribute_Domain_Values: Codeset_Domain: Codeset_Name: Federal Standards for the Delineation of Hydrologic Unit Boundaries Codeset_Source: Please refer to the Entity and Attribute Overview for valid values Attribute: Attribute_Label: Shape_Length Attribute_Definition: Length of feature in internal units. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Positive real numbers that are automatically generated. Attribute: Attribute_Label: Shape_Area Attribute_Definition: Area of feature in internal units squared. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Positive real numbers that are automatically generated. Attribute: Attribute_Label: OBJECTID_1 Attribute_Definition: Internal feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: HU_12_NAME Attribute_Definition: A unique name for each 6th level hydrologic unit that relates to the major water feature within the polygon or the major water body it contributes to Attribute_Definition_Source: Federal Standards for Delineation of Hydrologic Unit Boundaries Attribute_Domain_Values: Codeset_Domain: Codeset_Name: Federal Standards for the Delineation of Hydrologic Unit Boundaries Codeset_Source: Please refer to the Entity and Attribute Overview for valid values Attribute: Attribute_Label: HU_12_TYPE Attribute_Definition: This field identifies the type of watershed. Attribute_Definition_Source: Federal Standards for Delineation of Hydrologic Unit Boundaries Attribute_Domain_Values: Codeset_Domain: Codeset_Name: Federal Standards for the Delineation of Hydrologic Unit Boundaries Codeset_Source: Please refer to the Entity and Attribute Overview for valid values Attribute: Attribute_Label: HU_12_MOD Attribute_Definition: This field identifies interbasin transfers (IT), dams at outlet (DM), etc. that modify natural overland flow as Modifications are identified from most significant to least significant modification(s). Hydrologic units with no modification are marked with NM. Attribute_Definition_Source: Federal Standards for Delineation of Hydrologic Unit Boundaries Attribute_Domain_Values: Codeset_Domain: Codeset_Name: Federal Standards for the Delineation of Hydrologic Unit Boundaries Codeset_Source: Please refer to the Entity and Attribute Overview for valid values Attribute: Attribute_Label: LABEL_10 Attribute: Attribute_Label: LABEL_12 Overview_Description: Entity_and_Attribute_Overview: This is a description of attributes by field from the Federal Standards for Delineation of Hydrologic Unit Boundaries 1) Polygon attributes Huc_8 : Eight Digit Hydrologic Unit Code A unique 8-digit code from the USGS map series "Hydrologic Unit Maps". The same number was used in every record that pertains to a subwatershed that resides within the same 8-digit sub-basin.Numbers were assigned in an upstream to downstream fashion. Where no downstream/upstream relationship could be determined numbers were assigned in a clockwise fashion. Huc_10: Ten Digit Hydrologic Unit Code This field provides a unique 10-digit code for each watershed. This same number was used in every record that pertains to a subwatershed that resides within the same 10-digit watershed. Numbers were assigned in an upstream to downstream fashion. Where no downstream/upstream relationship could be determined numbers were assigned in a clockwise fashion. Huc_12: Twelve Digit Hydrologic Unit Code This field provides a unique 12-digit code for each subwatershed. Numbers were assigned in an upstream to downstream fashion. Where no downstream/upstream relationship could be determined numbers were assigned in a clockwise fashion. Acres: Acres Area of subwatershed including non-contributing areas calculated to acres as a whole number, no decimals. The "Acres" field was calculated from the "Area" field. States: States The "States" field includes the names of all state(s) that the subwatershed falls within. The 2-digit postal abbreviation in upper case and in alphabetical order was used, separated with a comma. Ncontrb_a: Non-Contributing Area Drainage areas that do not flow toward the outlet of any hydrologic unit are considered non-contributing. If a non-contributing area is on the boundary between two or more hydrologic units, the non-contributing area is associated with the hydrologic unit adjacent to the low point on the boundary. This attribute should be the total of the non-contributing areas within a hydrologic unit calculated in acres. Hu_10_ds: Fifth Level Downstream Hydrologic Unit Code This field has the 10-digit code of the 5th level hydrologic unit that is receiving the majority of the flow from the watershed that the 6th level HU falls within. Outlets created by ditching or other artificial drainage were not considered for this field. If an HU flows into an ocean or the Gulf of Mexico, this field was populated with "OCEAN" and if a HU flows into one of the Great Lakes the term "LAKE" was used. If a HU flows across international borders, "CANADA" or "MEXICO" was used depending on which country the HU drains into. If an HU is a closed basin, then the term "CLOSED BASIN"was used. Hu_10_name: Fifth Level Hydrologic Unit Name This field used officially recognized names only. This field was populated by following the directions in subsection 6.3 "Watershed and Subwatershed Naming Protocol". The name used to attribute the watershed was used only once within a 4th level unit. Hu_10_mod: Fifth Level Hydrologic Unit Modifications This field identifies any type of modifications to natural overland flow that alters the location of the hydrologic unit boundary for a 10-digit watershed. This field shows the most significant to least significant modification(s) to the watershed boundary. One or more of the following abbreviations was used. SC - Stormwater Canal or Drainage Canal ID - Irrigation Ditch IT - Interbasin Transfer BC - Barge Canal or Navigation Canal SD - Stormwater Ditch PD - Pipe Diversion CD - Channel Diversion NC - Noncontributing Area KA - Karst LE - Levee NM - No Modifications OC - Overflow Channel or Flume DM - Dam at outlet or HU boundary GC - General Canal/Ditch PS - Pumping Station DD - Drainage Ditch SI - Siphon AD - Aqueduct RS - Reservoir TF - Transportation Feature (road, railroad, docks etc.) GF - Ground-Water Flow MA - Mining Activity UA - Urban Area GL - Glacier IF - Ice Field OF - Overbank Flow OT - Other Hu_10_type: Fifth Level Hydrologic Unit Type This field was populated with the hydrologic unit type from the list provided that most closely identifies the watershed. S - "Standard" hydrologic unit - Any land HU with drainage flowing to a single outlet point, excluding non-contributing areas. This includes areas or small triangular wedges between adjacent HU's that remain after classic hydrologic units are delineated. Some examples include "true", "classic", "composite", and "remnant" hydrologic units. C - "Closed Basin" hydrologic unit - A drainage area that is 100% non-contributing. This means all surface flow is internal, no overland flow leaves the hydrologic unit through the outlet point. F - "Frontal" hydrologic unit - Areas along the coastline of lakes, oceans, bays, etc. that have more than one outlet. These HU's are predominantly land with some water areas at or near the outlet(s). M - “Multiple Outlet” hydrologic unit An area that has more than one natural outlet; for example, an outlet located on a stream with multiple channels. This does not include frontal or water hydrologic units, hydrologic units with artificial interbasin transfers, drainage outlets through karst or ground-water flow, or outlets that cross a stream with an island. This code should be used only in rare instances. W - "Water" hydrologic unit - Hydrologic units that are predominantly water with adjacent land areas, ex. lake, easturies, harbors. I - "Island" hydrologic unit - A hydrologic unit that is one or more islands and adjacent water out to the toe of the shore face. U - "Unclassified" hydrologic unit - A hydrologic unit that can't be defined or doesn't fit into one of the types that have been listed. Hu_12_ds: Sixth Level Downstream Hydrologic Unit Code This field was populated with the 12-digit code of the 6th level hydrologic unit that is receiving the majority of the flow from the subwatershed. Outlets created by ditching or other artificial drainage were not considered for this field. If a HU flows into an ocean or the Gulf of Mexico it was populate with "OCEAN" and if a HU flows into one of the Great Lakes the term "LAKE" was used. If a HU flows across international borders, "CANADA" or "MEXICO" was used depending on which country the HU drains into. If an HU is a closed basin, this field was populated with the term "CLOSED BASIN". Hu_12_name: Sixth Level Hydrologic Unit Name Officially recognized names were used in this field. This field was populated by following the directions in subsection 6.3 "Watershed and Subwatershed Naming Protocol". The name used to attribute the subwatershed was used only once within a 4th level unit. Hu_12_mod: Sixth Level Hydrologic Unit Modifications This field identifies any type of man-made modification(s) to natural overland flow that alters the location of the hydrologic unit boundary for a 12-digit subwatershed. One or more of the following abbreviations was chosen for this field. SC - Stormwater Canal or Drainage Canal ID - Irrigation Ditch IT - Interbasin Transfer BC - Barge Canal or Navigation Canal SD - Stormwater Ditch PD - Pipe Diversion CD - Channel Diversion NC - Noncontributing Area KA - Karst LE - Levee NM - No Modifications OC - Overflow Channel or Flume DM - Dam at outlet or HU boundary GC - General Canal/Ditch PS - Pumping Station DD - Drainage Ditch SI - Siphon AD - Aqueduct RS - Reservoir TF - Transportation Feature (road, railroad, docks etc.) GF - Ground-Water Flow MA - Mining Activity UA - Urban Area GL - Glacier IF - Ice Field OF - Overbank Flow OT - Other Hu_12_type: Sixth Level Hydrologic Unit Type This field was populated with the hydrologic unit type from the list provided that most closely identifies the subwatershed. S - "Standard" hydrologic unit - Any land HU with drainage flowing to a single outlet point, excluding non-contributing areas. This includes areas or small triangular wedges between adjacent HU's that remain after classic hydrologic units are delineated. Some examples include "true", "classic", "composite", and "remnant" hydrologic units. C - "Closed Basin" hydrologic unit - A drainage area that is 100% non-contributing. This means all surface flow is internal, no overland flow leaves the hydrologic unit through the outlet point. F - "Frontal" hydrologic unit - Areas along the coastline of lakes, oceans, bays, etc. that have more than one outlet. These HU's are predominantly land with some water at or near the outlet(s). M - “Multiple Outlet” hydrologic unit An area that has more than one natural outlet; for example, an outlet located on a stream with multiple channels. This does not include frontal or water hydrologic units, hydrologic units with artificial interbasin transfers, drainage outlets through karst or ground-water flow, or outlets that cross a stream with an island. This code should be used only in rare instances. W - "Water" hydrologic unit - Hydrologic units that are predominantly water with adjacent land areas, ex. lake, easturies. I - "Island" hydrologic unit - A hydrologic unit that is one or more islands and adjacent water out to the toe of the shore face. U - "Unclassified" hydrologic unit - A hydrologic unit that can't be defined or doesn't fit into one of the types that have been listed. 2) Line attributes Hu_level: Hydrologic Unit Level This field provides the means to create cartographically pleasing maps. This field is populated with the highest hydrologic unit level (smallest number) for the line (arc) represented by the record. The attribute was recorded using numbers 1 through 6 representing each level with 1 being the highest and 6 the lowest level. An example would be if a line represents a region, subregion, basin, subbasin, watershed, and subwatershed boundary, then this cell was populated with a 1 (Region). Below is a list of numbers used for each level. Level Digit# Name 1 2 Region 2 4 Subregion 3 6 Basin 4 8 Subbasin 5 10 Watershed 6 12 Subwatershed Linesource: Line Spatial Data Source The Linesource indicates the base map source(s) used to delineate at 1:24,000 scale. The field was populated using one of the standardized code(s) listed below. If more than one code was used, then a comma was used to separate the codes. TOPO24 - Delineation from hardcopy 1:24,000 scale topographic maps TOPO25 - Delineation from hardcopy 1:25,000 topgraphic maps, only Alaska and Caribbean TOPO63 - Delineation from hardcopy 1:63,360 topographic maps, only Alaska and Caribbean DRG24 - Delineation from 1:24,000 scale Digital Raster Graphics DRG25 - Delineation from 1:25,000 Digital Raster Graphics, only Alaska and Caribbean DRG63 - Delineation from 1:63,360 Digital Raster Graphics, only Alaska and Caribbean DEM10 - Derived from 10 meter Digital Elevation Model DEM30 - Derived from 30 meter Digital Elevation Model NED30 - Derived from 30 meter National Elevation Dateset Model EDNA30 - (formally NED-H), derived from 30 meter Elevation Derivatives for National Applications BATH"scale" (ex. BATH24) - Interpreted from NOAA 1:24,000 scale bathymetric data HYPSO"scale" (ex. HYPSO24)- Delineated from 1:24,000 scale contour data ORTHO"scale" (ex. ORTHO12) - Interpreted from 1:12,000 scale Ortho-imagery DEDEM10 - Drainage enforced 10 meter Digital Elevation Model DEDEM30 - Drainage enforced 30 meter Digital Elevation Model GPS - Derived from Global Positioning System LIDAR - Derived from LIDAR IFSAR - Derived from IFSAR data OTH - Other UNK - Unknown All other reference and source maps not listed should be noted in the metadata. Meta_id: Metadata ID Number The Metadata ID is a code that identifies which metadata file applies to the arc. In most cases there is only one metadata file. However, in some cases more than one metadata file was used to identify different groups and/or procedures used to produce the lines. The metadata ID is a 4-character code starting with the 2-letter state postal code, followed by a 2-digit sequence number. For example "OK01", "ID02", etc Entity_and_Attribute_Detail_Citation: Federal Standard for Delineation of Hydrologic Unit Boundaries Distribution_Information: Resource_Description: Downloadable Data Metadata_Reference_Information: Metadata_Date: 20080722 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: USGS Mississippi Water Science Center Contact_Person: K. Van Wilson Contact_Position: Hydrologist, P.E. Contact_Address: Address_Type: mailing and physical address Address: 308 South Airport Road City: Jackson State_or_Province: MS Postal_Code: 39208 Country: US Contact_Voice_Telephone: 601-933-2922 Contact_Facsimile_Telephone: 601-933-2901 Contact_Electronic_Mail_Address: kvwilson@usgs.gov Hours_of_Service: 8:00a - 4:30p Central, M-F Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998 Metadata_Time_Convention: local time Metadata_Extensions: Online_Linkage: http://www.esri.com/metadata/esriprof80.html Profile_Name: ESRI Metadata Profile Metadata_Extensions: Online_Linkage: http://www.esri.com/metadata/esriprof80.html Profile_Name: ESRI Metadata Profile